Package: cdebootstrap-udeb
Priority: optional
Section: debian-installer
Installed-Size: 136
Maintainer: Bastian Blank <waldi@debian.org>
Architecture: arm
Source: cdebootstrap
Version: 0.3.10bpo1
Depends: libc6 (>= 2.3.2.ds1-21), libdebconfclient0, libdebian-installer-extra4 (>= 0.29), libdebian-installer4 (>= 0.29)
Filename: pool/main/c/cdebootstrap/cdebootstrap-udeb_0.3.10bpo1_arm.udeb
Size: 17228
MD5sum: b4f4368464df1c73ae9de5c7b3a52ab5
SHA1: b8d43b2c3c72b7c246421d4749cdf13a294d7535
SHA256: 791f967263902e7d13eb4ae820f021fd9f3e3f1d879b9b47eb01204c30d5683a
Description: Bootstrap a Debian system
cdebootstrap is used to create a Debian base system from scratch.
Package: cryptsetup-udeb
Priority: optional
Section: debian-installer
Installed-Size: 416
Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>
Architecture: arm
Source: cryptsetup
Version: 2:1.0.3-2bpo1
Depends: libc6 (>= 2.3.2.ds1-21), libdevmapper1.01, libpopt0 (>= 1.7), libuuid1, dmsetup-udeb
Filename: pool/main/c/cryptsetup/cryptsetup-udeb_1.0.3-2bpo1_arm.udeb
Size: 176444
MD5sum: b7a13d8ea1ed9823b6390a3af6a6e912
SHA1: 4496d06f5c6349f4f754096232a79e01d9249fe9
SHA256: 414fb38b1bfb6e941765c8579e3432e8c2030f80508e0bd44143e442011e5dbe
Description: configures encrypted block devices
Since kernel 2.6.4, encrypted filesystem support is provided by the device
mapper target dm-crypt. This utility provides a command-line interface for
configuring this facility. It has integrated support for LUKS.
.
cryptsetup is backwards compatible with the on-disk format of cryptoloop,
but also supports more secure formats. This package also includes support
for automatically configuring encrypted devices at boot time via the config
file /etc/crypttab. When combined with newer versions of the debian
initrd-tools and standard debian kernels, cryptoroot is also supported.
Package: debian-archive-keyring-udeb
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Michael Vogt <mvo@debian.org>
Architecture: all
Source: debian-archive-keyring
Version: 2006.11.22~bpo.2
Recommends: gpgv-udeb
Filename: pool/main/d/debian-archive-keyring/debian-archive-keyring-udeb_2006.11.22~bpo.2_all.udeb
Size: 7230
MD5sum: d087231ba12ab805404846e6171405e6
SHA1: b1482dcf9756fb907622a3efd38d5acd69d5ba5b
SHA256: 12b81a25174f15bc3616458c2b619afe4298111a4d81aa86993f0acc9c9d86ec
Description: GnuPG keys of the Debian archive
The Debian project digitally signs its Release files. This package
contains the archive keys used for that, in a minimal form for use
in the installer.
Package: debootstrap-udeb
Priority: required
Section: debian-installer
Installed-Size: 164
Maintainer: Anthony Towns <ajt@debian.org>
Architecture: arm
Source: debootstrap
Version: 0.3.3~bpo.1
Depends: libc6 (>= 2.3.2.ds1-21), mounted-partitions
Filename: pool/main/d/debootstrap/debootstrap-udeb_0.3.3~bpo.1_arm.udeb
Size: 38730
MD5sum: e1bf3b0b021ed03efd6ffca92d5f791d
SHA1: 2f73ac6573f2dd2fe3f7eb2f1a72ee55509eb217
SHA256: 1f63f7ab39150e7211fb02662c75a685f1726dcd4c4ce2dc0a70e20b2671b603
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: discover1-data-udeb
Priority: extra
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: all
Source: discover1-data
Version: 1.2006.01.14~bpo.1
Filename: pool/main/d/discover1-data/discover1-data-udeb_1.2006.01.14~bpo.1_all.udeb
Size: 18012
MD5sum: e1442e407cb71424010f60720fc37f68
SHA1: 2ba73f3304bb245e2075f2dd26b218ff0945bc47
SHA256: d3a7e51e4987d4ca2a210259f33e19ccd5ad53af58535c8a6fc51157ff45fbd0
Description: hardware lists for libdiscover1 (short list)
The libdiscover1 library requires this package to look up information about
various hardware devices using the identification data that they report. It
contains data detailing various PCI, PCMCIA, and USB devices.
.
There are two separate lists for kernel versions 2.4 and 2.6. Discover
automatically chooses the appropriate list for your running kernel.
.
This is the short list of HW required by d-i during installation.
Package: discover1-udeb
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: arm
Source: discover1
Version: 1.7.18~bpo.1
Provides: discover
Depends: libc6 (>= 2.3.2.ds1-21), libdiscover1, discover1-data-udeb (>= 1.2004.09.24)
Filename: pool/main/d/discover1/discover1-udeb_1.7.18~bpo.1_arm.udeb
Size: 6730
MD5sum: 81f4e2b331fe3d8b848f7bc99d1674f9
SHA1: 5d9f3968e1ecab69e790a0c8c040d692bd59e00c
SHA256: 9aa2126ab4ac4af41db54fd2b7b18b2abb2a4a38fcc58c4ecae9b608dd210b3d
Description: hardware identification system (udeb)
Package: e2fsprogs-udeb
Priority: optional
Section: debian-installer
Installed-Size: 396
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: arm
Source: e2fsprogs
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1
Depends: libblkid1-udeb, libc6 (>= 2.3.2.ds1-21)
Filename: pool/main/e/e2fsprogs/e2fsprogs-udeb_1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1_arm.udeb
Size: 169150
MD5sum: 64aeb02e1f86f68f03c2da551aa0d2e2
SHA1: 558a0fc9b96ab8d1a33ba8fb64a6e8aeeba583e4
SHA256: 65b3d75ca08a91fa304d575cd377fe68578149780cbdb6f989f3e3a86406b3e8
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: gnupg-udeb
Priority: extra
Section: debian-installer
Installed-Size: 772
Maintainer: James Troup <james@nocrew.org>
Architecture: arm
Source: gnupg
Version: 1.4.6-1~bpo.1
Depends: libc6 (>= 2.3.2.ds1-21), libusb-0.1-4 (>= 2:0.1.10a), zlib1g (>= 1:1.2.1)
Filename: pool/main/g/gnupg/gnupg-udeb_1.4.6-1~bpo.1_arm.udeb
Size: 375972
MD5sum: a3949f956de937989b07f442ee52f4ee
SHA1: 53e84bc3f358bb8e2f1dda30c6aaf4f6874eadfe
SHA256: 88ae856983bfe796921e6146a31ef923b040a0c81482a910cc5f01822d1d670b
Description: GNU privacy guard - a free PGP replacement
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG packaged in minimal form for use in debian-installer.
Package: gpgv-udeb
Priority: extra
Section: debian-installer
Installed-Size: 288
Maintainer: James Troup <james@nocrew.org>
Architecture: arm
Source: gnupg
Version: 1.4.6-1~bpo.1
Depends: libc6 (>= 2.3.2.ds1-21), zlib1g (>= 1:1.2.1)
Filename: pool/main/g/gnupg/gpgv-udeb_1.4.6-1~bpo.1_arm.udeb
Size: 134106
MD5sum: 00f63e4401a937504f695b51e94f038a
SHA1: cbfa5d098bf5f3ae76d7790c452d116d4fb62c52
SHA256: 2a446d25766d1bbed75ba5a0f27169d49fc320f3cab32441f874f95daf5b628e
Description: minimal signature verification tool
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG's signature verification tool, gpgv, packaged in minimal
form for use in debian-installer.
Package: libblkid1-udeb
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: arm
Source: e2fsprogs
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1
Provides: libblkid1
Depends: libc6 (>= 2.3.2.ds1-21)
Filename: pool/main/e/e2fsprogs/libblkid1-udeb_1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1_arm.udeb
Size: 14258
MD5sum: 3ace11895fa54a444ba871bec03e3274
SHA1: a24ec12bc1387ba33d4740b5bcd4833b595fa2c0
SHA256: d3898deb950fb2404fe0a63a5bc810beddad5fee909d005da361fff1a0e4f1f8
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libdirectfb-0.9-24-udeb
Priority: optional
Section: debian-installer
Installed-Size: 916
Maintainer: Guillem Jover <guillem@debian.org>
Architecture: arm
Source: directfb
Version: 0.9.24-3bpo1
Provides: libdirectfb-0.9-24
Depends: libc6 (>= 2.3.2.ds1-21), libdirectfb-0.9-24, libfreetype6 (>= 2.1.5-1), libpng12-0 (>= 1.2.8rel), libsysfs2, zlib1g (>= 1:1.2.1)
Filename: pool/main/d/directfb/libdirectfb-0.9-24-udeb_0.9.24-3bpo1_arm.udeb
Size: 367904
MD5sum: 8326b3377f76690aba6fc63b7591461f
SHA1: 87ad62ee82916c443d388e4acf1c77c97fa717fd
SHA256: 54743b8b138ed8b2463ad97749331fbc9f02d77fbbda9d0622e2e8e75514fc16
Description: frame buffer graphics library
DirectFB is a graphics library which was designed with embedded systems
in mind. It offers maximum hardware accelerated performance at a minimum
of resource usage and overhead.
.
This package contains the shared libraries for use with the debian
installer.
Package: libdiscover1-udeb
Priority: extra
Section: debian-installer
Installed-Size: 80
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: arm
Source: discover1
Version: 1.7.18~bpo.1
Provides: libdiscover1
Depends: libc6 (>= 2.3.2.ds1-21), discover1-data-udeb (>= 1.2004.09.24)
Filename: pool/main/d/discover1/libdiscover1-udeb_1.7.18~bpo.1_arm.udeb
Size: 28474
MD5sum: 2a1816e6fd1e7ec645048aebbd60fbb0
SHA1: 7dc434460984c63a070a912a40e7fc72f0c5c3e9
SHA256: 318c38790fa4936994e4c088f081ab1e371ec29c2aee62913d08b972586c9c83
Description: hardware identification library (udeb)
Package: libglib2.0-udeb
Priority: extra
Section: debian-installer
Installed-Size: 2860
Maintainer: Sebastien Bacher <seb128@debian.org>
Architecture: arm
Source: glib2.0
Version: 2.10.2-0bpo1
Provides: libglib2.0-0
Depends: libc6 (>= 2.3.2.ds1-21)
Filename: pool/main/g/glib2.0/libglib2.0-udeb_2.10.2-0bpo1_arm.udeb
Size: 541820
MD5sum: e3132448bbab3af00060e0e1f3c1c773
SHA1: c27a06105fd8e3f8805836839dce8731c76270b5
SHA256: cb596527618300d691e2a92d271ade77e936032d4acdb909b00f2f401d9c0c1e
Description: The GLib library of C routines
This is a udeb, or a microdeb, for the debian-installer.
.
GLib is a library containing many useful C routines for things such
as trees, hashes, lists, and strings. It is a useful general-purpose
C library used by projects such as GTK+, GIMP, and GNOME.
Package: libiw28-udeb
Priority: extra
Section: debian-installer
Installed-Size: 36
Maintainer: Guus Sliepen <guus@debian.org>
Architecture: arm
Source: wireless-tools
Version: 28-1~bpo.1
Depends: libc6 (>= 2.3.2.ds1-21)
Filename: pool/main/w/wireless-tools/libiw28-udeb_28-1~bpo.1_arm.udeb
Size: 12416
MD5sum: 19f0c70f40258e91ee93ee9b754a1c6b
SHA1: 2e61ae1c5de9e6302999608b3c7cb12f0f7f4459
SHA256: 171d52d02064bbf2d4eefea297f6b80cab0409969d3ad3af87323ca592918c59
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: libparted1.7-udeb
Priority: extra
Section: debian-installer
Installed-Size: 392
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Architecture: arm
Source: parted
Version: 1.7.1-2.1~bpo.1
Provides: libparted1.7-1
Depends: libc6 (>= 2.3.2.ds1-21), libuuid1
Filename: pool/main/p/parted/libparted1.7-udeb_1.7.1-2.1~bpo.1_arm.udeb
Size: 176080
MD5sum: 87e9adcf0cdc93d833804fecbf271286
SHA1: 0528cfd4d730a27067da0b16ebde92d564d27e7c
SHA256: 73db293e85f0abcb106e0481c762118cf87904dda2b31558716d02ffebac928c
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libslang2-udeb
Priority: extra
Section: debian-installer
Installed-Size: 640
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Architecture: arm
Source: slang2
Version: 2.0.6-3~bpo.2
Depends: libc-udeb
Filename: pool/main/s/slang2/libslang2-udeb_2.0.6-3~bpo.2_arm.udeb
Size: 236762
MD5sum: deedbe3fa49a4405296cfbaf22437e33
SHA1: b23983d62f563bebd8d90fc6dfe292ddb5966a6a
SHA256: 4c7658ddfeec4aef6fa9fa7b94d3f7b771ecff0b392e28972cd5780dfa861224
Description: S-Lang library for Debian Installer
This is a udeb, or a microdeb, of the S-Lang library with wide charater
support. As such it is the installer counterpart of libslang2.
You only need this package to support applications needing S-Lang during
the Debian installation process time and probably don't need to select it.
Package: libsysfs2-udeb
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Martin Pitt <mpitt@debian.org>
Architecture: arm
Source: sysfsutils
Version: 2.0.0-6bpo1
Provides: libsysfs2
Depends: libc6 (>= 2.3.2.ds1-21)
Filename: pool/main/s/sysfsutils/libsysfs2-udeb_2.0.0-6bpo1_arm.udeb
Size: 12696
MD5sum: 9ea8e4ae492fdff70029a75238520ba4
SHA1: d0ad1f365f28f5e09fc39c564e5b98a04d91357b
SHA256: 2622634b81eead94b137874e2b0e746ad7e7ab2c5b75ecf67b13d4687ecb364d
Description: interface library to sysfs
Sysfs is a virtual file system in Linux kernel 2.5+ that provides a
tree of system devices. libsysfs provides a stable programming
interface to sysfs and eases querying system devices and their
attributes.
.
This is a minimal package for use in debian-installer.
Package: libuuid1-udeb
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: arm
Source: e2fsprogs
Version: 1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1
Replaces: libuuid1
Provides: libuuid1
Depends: libc6 (>= 2.3.2.ds1-21)
Filename: pool/main/e/e2fsprogs/libuuid1-udeb_1.39+1.40-WIP-2006.10.02+dfsg-2~bpo.1_arm.udeb
Size: 6894
MD5sum: bd9e25345e072e17cd7d554e50ea3ca0
SHA1: 2bb4dcc7b95d7dda5726b62b94b0ed9ba3ad1f2a
SHA256: c9a8f23a9c0b55c3a420595584721672e2d9e99828d93b685ba6cc7b99d2e296
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: mdadm-udeb
Priority: optional
Section: debian-installer
Installed-Size: 156
Maintainer: Debian/Ubuntu mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Architecture: arm
Source: mdadm
Version: 2.4.1-5bpo1
Depends: libc6 (>= 2.3.2.ds1-21)
Filename: pool/main/m/mdadm/mdadm-udeb_2.4.1-5bpo1_arm.udeb
Size: 64836
MD5sum: ee18c0ee7904e6eb6b3da74f5e066df4
SHA1: 0875eea7ff247e8d45d9e0c9a1afdd4996b7d548
SHA256: 7248a948a2739bf4d86dd2fee3ca3bede73031279e3ba23c8044c22b6d1bd380
Description: tool to administer Linux MD device arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
devices (software RAID), as well as multipath devices.
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: module-init-tools-udeb
Priority: extra
Section: debian-installer
Installed-Size: 108
Maintainer: Marco d'Itri <md@linux.it>
Architecture: arm
Source: module-init-tools
Version: 3.3-pre4-1~bpo.1
Depends: libc6 (>= 2.3.2.ds1-21)
Filename: pool/main/m/module-init-tools/module-init-tools-udeb_3.3-pre4-1~bpo.1_arm.udeb
Size: 31522
MD5sum: 0b62a376a87ef0f6fb83a64ab7eaea70
SHA1: 0b292b3fb71fa4382eea7107131783782824f721
SHA256: ec2734efcf38801ca67fcf423136f331a3db2331dde3fed723fe64cc3bae0637
Description: tools for managing Linux kernel modules
This is the debian-installer version of module-init-tools.
Package: openssh-client-udeb
Priority: optional
Section: debian-installer
Installed-Size: 368
Maintainer: Matthew Vernon <matthew@debian.org>
Architecture: arm
Source: openssh
Version: 1:4.3p2-5~bpo.1
Depends: libc6 (>= 2.3.2.ds1-21), libssl0.9.7, zlib1g (>= 1:1.2.1), libnss-files-udeb
Filename: pool/main/o/openssh/openssh-client-udeb_4.3p2-5~bpo.1_arm.udeb
Size: 167184
MD5sum: 01ee1732c39bc55f92e4bd8283a51096
SHA1: e698c471a0d5d18893414f794a145b222e91cbdd
SHA256: e549c0720eb24531468e076237fd598649a7ac216e8e8971bc42bddd72e5ae09
Description: Secure shell client for the Debian installer
This is the portable version of OpenSSH, a free implementation of
the Secure Shell protocol as specified by the IETF secsh working
group.
.
This package provides the ssh client for use in debian-installer.
installer-menu-item: 999
Package: openssh-server-udeb
Priority: optional
Section: debian-installer
Installed-Size: 388
Maintainer: Matthew Vernon <matthew@debian.org>
Architecture: arm
Source: openssh
Version: 1:4.3p2-5~bpo.1
Depends: libc6 (>= 2.3.2.ds1-21), libssl0.9.7, zlib1g (>= 1:1.2.1), libnss-files-udeb
Filename: pool/main/o/openssh/openssh-server-udeb_4.3p2-5~bpo.1_arm.udeb
Size: 171810
MD5sum: efeeed4dfc2e76ce0582457530aa78d1
SHA1: 91b20e5a57afaabbab713d7c37757a2c79cc600e
SHA256: eb1339c451a9033b26ca890c66ce1a1ffcdc874b9e4ea10e30980a4f20d3d479
Description: Secure shell server for the Debian installer
This is the portable version of OpenSSH, a free implementation of
the Secure Shell protocol as specified by the IETF secsh working
group.
.
This package provides the sshd server for use in debian-installer.
Since it is expected to be used in specialized situations (e.g. S/390
installs with no console), it does not provide any configuration.
Package: parted-udeb
Priority: extra
Section: debian-installer
Installed-Size: 72
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Architecture: arm
Source: parted
Version: 1.7.1-2.1~bpo.1
Provides: parted
Depends: libc6 (>= 2.3.2.ds1-21), libparted1.7-1 (>= 1.7.1-1)
Filename: pool/main/p/parted/parted-udeb_1.7.1-2.1~bpo.1_arm.udeb
Size: 26560
MD5sum: 3c511025cbb1e6c72b59312395c8a66a
SHA1: 970641fa79f55e63325846f60a561fc47e48bf06
SHA256: 830c890eb3aa0adda322764060e02e6bb47b15789c3c57c5fa1a89bd4686192b
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: pcmciautils-udeb
Priority: extra
Section: debian-installer
Installed-Size: 100
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: arm
Source: pcmciautils
Version: 013-0bpo1
Depends: udev-udeb, libc6 (>= 2.3.2.ds1-21), libsysfs2
Filename: pool/main/p/pcmciautils/pcmciautils-udeb_013-0bpo1_arm.udeb
Size: 20680
MD5sum: 2c66b22ec03860c3939bd1c26947fcbc
SHA1: d510ba94ab5456623120a9f9379119dd0a749fd1
SHA256: a63392e340e4e1b1caa41e21689c1909d5c00c21080c307d098385a93f6d8dd9
Description: PCMCIA utilities for Linux 2.6
This package provides PCMCIA initialisation tools for Linux 2.6.13-rc1 or
later, replacing the old pcmcia-cs tools used with earlier kernel versions.
PCMCIA cards are commonly used in laptops to provide expanded capabilities
such as network connections, modems, increased memory, etc.
.
To use PCMCIA you need to have kernel modules available to support it.
These are included in the stock Debian 2.6 kernel packages.
.
This is a minimal package for use in debian-installer.
Package: ppp-udeb
Priority: optional
Section: debian-installer
Installed-Size: 308
Maintainer: Marco d'Itri <md@linux.it>
Architecture: arm
Source: ppp
Version: 2.4.4rel-1bpo1
Provides: configured-network
Depends: libc6 (>= 2.3.2.ds1-21), ethernet-card-detection, ppp-modules, di-utils
Filename: pool/main/p/ppp/ppp-udeb_2.4.4rel-1bpo1_arm.udeb
Size: 113452
MD5sum: 86c2fe33d877ee0f758e0d573472068a
SHA1: 7a4caea5472cd4f02fd6c7511eb2ee83aa175c54
SHA256: 00007695348320dca2f833a7f4239135f4e073047f0000bc4c9cb73b960f4f3c
Description: Point-to-Point Protocol (PPP) daemon
The Point-to-Point Protocol (PPP) provides a standard way to transmit
datagrams over a serial link, as well as a standard way for the machines
at either end of the link (the "peers") to negotiate various optional
characteristics of the link. Using PPP, a serial link can be used to
transmit Internet Protocol (IP) datagrams, allowing TCP/IP connections
between the peers.
.
ppp-udeb is a minimal ppp package used by the debian-installer.
installer-menu-item: 18
Package: ttf-dejavu-udeb
Priority: optional
Section: debian-installer
Installed-Size: 636
Maintainer: Peter Cernak <pce@users.sourceforge.net>
Architecture: all
Source: ttf-dejavu
Version: 2.7-1bpo1
Filename: pool/main/t/ttf-dejavu/ttf-dejavu-udeb_2.7-1bpo1_all.udeb
Size: 328828
MD5sum: be72588f30e96dc2cd6bf8e7800fbf30
SHA1: 6ed1f0565711bb3dc127d0abcb42368b07d672e6
SHA256: 9cb6b280cbc3f67af44511f5f45c24272881649e521723a5c015789d0f6336a7
Description: Bitstream Vera fonts with additional characters for D-I use
These fonts are based on the famous Bitstream Vera font family adding better
support for non-English languages. They currently cover the entire Latin
Ext-A range and parts of Latin Ext-B, Cyrillic, Greek and other ranges.
.
This package provides the fonts for use with the gtk frontend of
debian-installer.
Package: udev-udeb
Priority: optional
Section: debian-installer
Installed-Size: 408
Maintainer: Marco d'Itri <md@linux.it>
Architecture: arm
Source: udev
Version: 0.105-4~bpo.1
Depends: libc6 (>= 2.3.2.ds1-21)
Filename: pool/main/u/udev/udev-udeb_0.105-4~bpo.1_arm.udeb
Size: 109878
MD5sum: dce774701e09ee1f390f7babb3336560
SHA1: 086e4913abfafef58086814dafaeaacf79b7c129
SHA256: eceeec010f9e6d26c442975f0c81ef37ca513f6b79c085dfb48bb80cdb181d6a
Description: /dev/ and hotplug management daemon
udev is a daemon which dynamically creates and removes device nodes from
/dev/, handles hotplug events and loads drivers at boot time. It replaces
the hotplug package and requires a kernel not older than 2.6.12.
.
This is a minimal version for use in debian-installer.
Package: wireless-tools-udeb
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Guus Sliepen <guus@debian.org>
Architecture: arm
Source: wireless-tools
Version: 28-1~bpo.1
Depends: libc6 (>= 2.3.2.ds1-21), libiw28 (>= 28)
Filename: pool/main/w/wireless-tools/wireless-tools-udeb_28-1~bpo.1_arm.udeb
Size: 12368
MD5sum: 1af8e01f9c23eb52f624e423ae6595de
SHA1: c3924750cfe519b00a1936dd918edede9bfea690
SHA256: dfc84b7ea26563c7315bc840901add83d43b37f67be083b6519fe60af5ce1576
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.